Category: Flammer
Flammer
Showing 1–30 of 63 results
-
T-distributor with 1 inlet and 1 outlet straight 1.1/4″ and 1 outlet in T 3/4″.
-
Transmitter and receiver wireless for connection DMX-512.
-
T-distributor with 1 inlet and 1 outlet straight 1.25″ and 1 outlet in T 3/8″.
-
Transmitter and receiver wireless for connection DMX-512.
-
Dispenser with 1 inlet 1.1/4″ and 6 outlets 1/4″.
-
The FUEL DISTRIBUTOR 1 TO 6 is a dispenser with 1 inlet 1.1/4″ and 6 outlets 1/4″. It allows the installation of a Showven Flame System.
-
The WDMX RECEIVER is to receive the data from the transmitter and so it goes on each device. It takes 1 per product. Band 2.4Ghz ISM (2.4 Ã 2.525Ghz) 512 channels – 7 Groups Sensitivity -94dBm
-
For the WDMX TRANSMITTER, only one is sufficient, it is installed at the output of the DMX Controller. Very easy to use. Band 2.4Ghz ISM (2.4 Ã 2.525Ghz) 512 channels – 16 Groups Power 20dBm
-
Transmitter and receiver wireless for connection DMX-512.
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 80m
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 40m
-
Secondary supply hose for Showven Flame System with 3/8″ inlet and outlet Length 20m
-
Transmitter and receiver wireless for connection DMX-512.
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 40m
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 20m
-
Supply hose for Showven Flame System with 3/4″ inlet and outlet Length 10m
-
Transmitter and receiver wireless for connection DMX-512.
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 40m
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 20m
-
Main supply hose for Showven Flame System with 1/2″ inlet and outlet Length 10m
-
Transmitter and receiver wireless for connection DMX-512.
-
Main supply hose for Showven Flame System with 1.1/4″ inlet and outlet Length 20m
-
Main supply hose for Showven Flame System with 1.1/4″ inlet and outlet Length 10m
-
Tuyau principal de ravitaillement pour Showven Flame System avec entrée et sortie 1.1/4″. Ce tuyau a été conçu pour relier la U-PUMPER P20 à une NOURRICE DE DISTRIBUTION.
-
Transmitter and receiver wireless for connection DMX-512.
-
Transmitter and receiver wireless for connection DMX-512.
-
6 Circle Flamer X-F3600 machines 6 Flight Cases 1 unit XLR/DMX link cable included Power cable + link included 6 cans of Fire Yellow 10L offered
-
4 Circle Flamer X-F3600 machines 4 Flight Cases 1 unit XLR/DMX link cable included Power cable + link included 4 cans of Fire Yellow 10L offered
-
2 Circle Flamer X-F3600 machines 2 Flight Cases 1 unit XLR/DMX link cable included Power cable + link included 2 cans of Fire Yellow 10L offered
-
3 cycles of rotation never before seen flame effects Alternating full cycle and half cycle mode 182 preset shot sequences TRUE 1 powercon connector Flight Case included Power cable included